Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Hayward, CA
Chimney repair in Hayward often comes down to one thing: the Hayward Fault. Thousands of mid-century ranch homes here were built with masonry fireplaces and clay-tile flues, and decades of ground settling plus occasional seismic shifts have left many of those flues with hairline cracks and hidden separations. A standard sweep removes creosote but misses structural damage that can leak heat and gases into wall cavities. Our job is to find those issues before they become fires. Call (844) 980-4364 for a free estimate.
Why Hayward Homes Are Different
Hayward’s housing stock splits into two distinct worlds, and each one changes how we approach a chimney. The flatlands and older core, roughly the 94541 and 94544 areas, are dominated by 1940s through 1960s stucco ranches and bungalows. Those homes usually have original masonry fireplaces with unlined or clay-tile flues. Near the bay, salt air blows in and accelerates rust on dampers and caps. We routinely replace corroded caps on flatland homes that have never had a chimney issue otherwise. Up in the hills around 94542, the homes are larger 1970s and 80s builds with prefab metal fireboxes. Those systems need manufacturer-specific maintenance, and the hill terrain means crowns crack from a combination of fault-line settling and summer heat expansion. Hayward’s marine-influenced climate also means fireplaces get used intermittently from November through March, so creosote builds slowly but humidity works on mortar joints year-round. A chimney here needs a seismic-aware inspection, not just a brushing.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Hayward Services
Most Hayward homeowners call us about one of two things: getting the chimney cleaned before burning season, or clearing a dryer vent that has quietly packed with lint. Here is how each one works in this city.
Chimney Sweep in Hayward
A chimney sweep in Hayward starts with more than a brush. Because so many local flues are original clay tile from the 1950s and 60s, we check for the kind of hidden cracking that ground movement causes before we clean. We also look at rust on dampers and caps, which the bay’s salt air makes worse in the flatlands. The sweep itself removes creosote and soot so your fireplace burns safely through the November-to-March season. Read the full breakdown on our Chimney Sweep in Hayward page.
Dryer Vent Cleaning in Hayward
Lint-clogged dryer vents are one of the leading causes of residential fires, and Hayward’s older homes often have long, winding vent runs through crawl spaces or attics. That makes lint accumulate faster than in a short, straight vent. We clean the full run from the dryer to the exterior cap, remove the packed lint, and confirm airflow is moving the way it should. A dryer that takes two cycles to finish a load is usually telling you the vent is blocked. See Dryer Vent Cleaning in Hayward for the full scope and pricing.
Chimney Repair in Hayward
Chimney repair in Hayward is structural more often than it is cosmetic. The same fault-line settling that cracks sidewalks also shifts masonry chimneys, and once a flue separates or a crown cracks, water gets in and accelerates the damage every winter. Our team handles the full repair scope, from Chimney Repair on the flue side to crowns, caps, flashing, and liners on the exterior. We repair what others only report.
Chimney Crown Repair
Signs you need it
Cracked or spalled concrete on top of the chimney, water staining on the ceiling near the fireplace, or visible gaps where the crown meets the flue tile.
What it costs in Hayward
Chimney crown repair in Hayward typically runs $600 to $1,200 depending on the size of the crown and whether we need to rebuild it from scratch or can seal and resurface it.
How we do it
We remove loose concrete, build or reshape the crown with proper slope so water runs off, and seal it with a professional-grade material like Gelco or HeatShield.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling around the chimney, damp insulation in the attic near the chase, or rusted, lifted, or missing flashing at the roofline.
What it costs in Hayward
Flashing repair in Hayward typically runs $350 to $800 for a standard repair, though full replacement around a steep hill pitch can push higher.
How we do it
We remove the old flashing, install new step and counter flashing with proper overlap, and seal the transition so water cannot wick underneath the shingles.
Chimney Liner Installation
Signs you need it
A cracked clay-tile flue, a chimney that fails a level 2 inspection, or a gas appliance venting into an unlined masonry chimney.
What it costs in Hayward
Liner installation in Hayward typically runs $2,800 to $5,500 depending on flue height, liner diameter, and whether the old tile needs breaking out first.
How we do it
We size a stainless flexible liner to the existing flue, feed it down from the crown, and connect it to the appliance or fireplace so the exhaust has a continuous, code-compliant path.
Chimney Cap Installation
Signs you need it
Rain water dripping into the firebox, rusted or missing cap, birds or debris falling into the flue, or a visible dent from storm impact.
What it costs in Hayward
Cap installation in Hayward typically runs $300 to $600 for a standard stainless or copper cap, including fastening to the crown and a weather seal.
How we do it
We match the cap to the flue dimensions, set it square on the crown, and fasten it with stainless hardware so bay winds cannot lift it off.
Chimney Cap Replacement
Signs you need it
A rusted-through cap, severe corrosion from salt air in the flatlands, or a cap crushed by a fallen branch or storm impact.
What it costs in Hayward
Cap replacement in Hayward typically runs $350 to $700, including removing the old cap, inspecting the flue top, and installing a new cap with a seal.
How we do it
We remove the old cap, check the flue for damage underneath, and install a new cap rated for the flue size with stainless fasteners.
What Chimney Repair Costs in Hayward
| Item | Typical range in Hayward |
|---|---|
| Chimney crown repair | $600 – $1,200 |
| Chimney flashing repair | $350 – $800 |
| Chimney liner installation | $2,800 – $5,500 |
How do I know if my Hayward chimney needs repair or just cleaning?
If creosote is the problem, a sweep fixes it. If you have water stains, rust, cracked masonry, or a flue that fails an inspection, those are repair issues. We show you camera footage of the flue before recommending any repair.
Do I need a permit for chimney repair in Hayward?
Most liner installations and structural repairs in Hayward require a permit from the city’s building department. We can advise on what the scope requires, but the permit itself is handled through the city.
Brands We Service in Hayward
We work with professional-grade chimney materials, not hardware-store substitutes. That means HeatShield ceramic flue resurfacing, Gelco crown sealants, Olympia Chimney caps, and Famco dampers. Most common parts are stocked locally, so we do not have to wait a week for a cap or a damper. See our brands for the full list and what each one does.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Hayward, CA
| Service | Typical range in Hayward |
|---|---|
| Chimney sweep | $180 – $340 |
| Chimney crown repair | $600 – $1,200 |
| Chimney flashing repair | $350 – $800 |
| Chimney liner installation | $2,800 – $5,500 |
| Chimney cap installation | $300 – $600 |
| Chimney cap replacement | $350 – $700 |
| Dryer vent cleaning | $120 – $250 |
What pushes a Hayward price up is usually access: a steep hill roof, a chase that requires scaffolding, or a flue that has to have old clay tile broken out before a liner goes in. The written estimate sets the final price, so there are no surprises after we start.
Neighborhoods We Serve in Hayward
We run calls across Hayward from the flatlands near the bay up into the East Bay hills. The housing stock changes from block to block, and we adjust for it: clay-tile flues in the older stucco ranches, prefab metal fireboxes in the hill builds, and salt-air rust on the bay side.
- Burbank
- Jackson Triangle
- Tennyson-Alquire
- Mission-Foothill
- Hayward Highland
We quote a specific arrival window when you book, not a four-hour range. Call (844) 980-4364. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Service Area – Cities Near Hayward
Our trucks run the East Bay beyond Hayward, covering the same mid-century housing stock and bay-influenced conditions in several nearby cities. We also serve Castro Valley, CA, Union City, CA, Fremont, CA, and Pleasanton, CA. If your house sits on the Hayward Fault or carries a clay-tile flue, the same seismic-aware inspection applies.
Serving Hayward, CA – Our Local Coverage Area
We serve Hayward and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Hayward
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Most Hayward calls get a same-day or next-day slot depending on the season.
Yes. Because Hayward sits on the Hayward Fault, every inspection includes a seismic-aware flue check. We look for cracked clay tiles, separated mortar joints, and shifted crowns that a standard sweep would miss. The written estimate reflects whatever we find.
We work with whatever your HOA requires for chimney work. Many hill communities in Hayward need a repair scope in writing before approval. We can provide that documentation, and the final work follows the approved scope.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hayward Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Steven Yang"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Michelle Kim"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Nathan Ackerman